REMEDIATION
DIVISION

Soil Remediation
and Groundwater Remediation Systems

What is Soil Remediation?

Air Compressors

Air Strippers

Air Sparging Systems

Remediation Buildings

Groundwater Pumps

Oil-Water Separators

Soil Vapor Extraction Systems

Dual Phase Extraction Systems

Liquid Ring Pumps

Remediation
Trailers

Carbon Filtration System

Pump and Treat Systems

Rental Units

Find Sales Representatives

"Request For Quote" form

ELECTRICAL
DIVISION

Electrical Division Home Page

System Control Panels

FABRICATION
DIVISION

Stainless Steel Tanks and Fabrication

- Four sizes, 2 to 16 gpm
- Gravity flow
- Pump flow
- Lift over cover
- High temperature range
- Stainless steel coalescing media
- Adjustable oil skimmer
- V-shaped DNAPL hopper
- Dense Pak media
- 10 mg/L performance

The ER-DN-SS Coalescing Oil/Water/DNAPL Separator will remove DNAPL (dense non-aqueous phase liquid) contaminant and all non-emulsified oil from wastewater that has a minimum of suspended solids. It will produce an effluent with less than 10 mg/L of oil droplets measuring larger than 30 microns in size. The separated oil will be discharged through a nozzle, the DNAPL will be discharged through the bottom of the V-shaped hopper, and the water will be discharged through the effluent chamber.

The ER-DN-SS is constructed of stainless steel material with special baffles, V-shaped hopper and weirs to direct flow, skim oil, remove DNAPL, and control liquid levels in the separator. The stainless steel coalescing media is oleophilic. The oil coalesces and rises to the surface where the oil is removed via the adjustable skimmer while DNAPL descends to the bottom and is discharged through the hopper.

- 100% Fiberglass Mat Construction
- Integral Sludge Hopper
- Integral Oil Reservoir
- Adjustable Rotary Pipe Oil Skimmer
- Molded Fittings Standard
- Vapor Tight Lid Assembly
- PVC Coalescing Media
- Handles Wide Range of Flow Rates
- Heavy Duty Fiberglass Mat
- Uniform Thickness Throughout
- Internal Finish Sealed with Resin
- External Smooth Gel Coat Finish
- Heavy Duty Lid with Latches
- Standard Molded In Fittings